Detailed Product Description SMD style carbon resistor. Free direction for mounting due to cylindrical design. High solderability due to specially plated electrodes. High accuracy guaranteed(tolerance:±0.25% & T.C.R. ±25 ppm/oC). Electrodes strength is higher than flat chip...

Detailed Product Description SQ cement resistors are made by winding resistance wires around non-alkaline ceramic core, which is added with a layer of heat and humidity resistant and non-corrosive protective material. The wire wound resistor is then placed in a square ceramic package sealed with...

Detailed Product Description In small dimension and wide range in high resistance.Provide good performance to against overload and environmental condition.Rated ambient temperature is +70oC. Operating temperature range is between -55oC and +155oC. ...

Detailed Product Description A tubular ceramic resistor has a fixed number of windings and is wound with alloy wire as a resistance element. The staggering wound is made according to the desired resistance value, followed by the placement of the component mounts. It provides high starter resistor...

Detailed Product Description An aluminum encased resistor consists of an alloy metal coil-type resistance element assembled into an aluminum enclosure. Following high-temperature anodization, the enclosure is filled with a special non-flammable cement paste and after hardening, insulation is...

Detailed Product Description A C-shaped ceramic resister is wound with copper or chromium-alloy wire as a resistance element. Except for the slide contact surface, the entire component is coated with a high-temperature, non-flammable resin. After cooling and drying, insulation is applied through a...

Detailed Product Description Alumininm Case Wire Wound Resistor ...

Detailed Product Description FeatureAnti-MoistureHeat ResistantAir-Dried Enamel-Coated Surface ...

Detailed Product Description An assembly-type power resistor enclosure contains DR series of and/or DQ series resistors. The box offers excellent protection and safety, it not only provides high power load capability and durability, excellent heat dissipation, and a low temperature...

Detailed Product Description A tubular ceramic resistor has two terminals, and is wound with a resistance element consisting of a wave-shaped alloy ribbon. A high temperature, non-flammable resin insulation is applied after cooling and drying through a high temperature process and then the...